Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Through Curve Mesh -Primary Curve List Menu

Status
Not open for further replies.

aussiedesigner

Mechanical
Joined
Feb 11, 2013
Messages
17
Location
AU
Hi,

Recently when I goto create a new 'through curve mesh' surface, the list menu
for the Primary Curves has disappeared.Which is very annoying!

I've attached an image of what the menu looks like now.

I've restarted NX11 and that hasn't fixed the problem. Not sure if anyone out there
can explain why this has happened??

Thanks in advance.


 
 https://files.engineering.com/getfile.aspx?folder=0164dff8-7934-467d-a51f-8f2a396a8cb6&file=through_curve_mesh.PNG
Click on the Gear, then Show Collapsed Groups.

2018-12-05_15-11-55_wugtwz.jpg


Anthony Galante
Senior Support Engineer


NX3 to NX11 with almost every MR (24versions)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top