Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal Co-efficient of Expansion for ASTM A995 Gr 5A

Status
Not open for further replies.

Iranna Shettar

Mechanical
Apr 21, 2019
10
Dear ALL,

I NEED A INPUT TO CALCULATE THE DISPLACEMENT OF THE PUMP NOZZLE, THE MOC OF THE PUMP CASING IS ASTM A 995 GR 5A, WHICH I AM NOT ABLE TO FIND IN STANDARDS,
IF ANYONE CAN HELP IN GETTING THE SUBJECT DETAILS FOR (TEMP: 9, 21, 85 DEG CELCIUS) WOULD BE HELPFUL.

THANKS
IRANNA
 
Replies continue below

Recommended for you

I don't know if you will find a CTE for the cast version, you could start using the wrought equivalent though, S32750.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Yeah, just use data for the nearest alloy that is similar in overall composition.
Then turn off your caps lock.

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor