Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal Analysis

Status
Not open for further replies.
reilly22

reilly22

Mechanical
Joined
Oct 5, 2004
Messages
24
Location
US
I am wanting to conduct heat through a part and i would like to set it up such that the part starts at ambient (75F) and gets heated through conduction. I would like to see the effect of heat over a time period. I realize that this is vague but I'm not having a lot of luck with setting it up in Cosmos.
 
Sort by date Sort by votes
I suggest that you sign up a COSMOSWorks Professional Training Class. Please contact your SolidWorks Resller to sign up for the training.
 
Upvote 0 Downvote
That is not an option. I was hoping for some guidance. I know that a class would help.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

cobra46
  • Locked
  • Question Question
Linear Dynamic Analysis (Response Spectrum Analysis)
Replies
0
Views
1K
cobra46
cobra46
oharag11
  • Locked
  • Question Question
Error - Please enter a value greater than 0 - Thermal Joint?
Replies
0
Views
989
oharag11
oharag11
samim09me
  • Locked
  • Question Question
How Solidworks Motion Analysis function builder are used with examples
Replies
0
Views
956
samim09me
samim09me
seraph3333
  • Locked
  • Question Question
IR LED solidworks thermal simulation unexpected extreme low temperature problem
Replies
2
Views
330
seraph3333
seraph3333
BEMPE16524
  • Locked
  • Question Question
Cable Carousel Analysis
Replies
4
Views
583
BEMPE16524
BEMPE16524

Part and Inventory Search

Sponsor

Back
Top