Guest
Could you tell me the value of the positive and zero impedance of the ACSR 330MCM line which has two conducts in one phase?
Thanh you very much for your reply.
Thanh you very much for your reply.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
To determine the sequence impedances several parameters are required in addition to the size of the cable such as geometric configuration of the line, type of cable, ground wire, transposition, ground resistivity, etc.
In general, the positive and negative impedances are the same and the zero sequence could be more than 3 times larger than the positive or negative sequence impedance.
In general, the positive and negative impedances are the same and the zero sequence could be more than 3 times larger than the positive or negative sequence impedance.
- Status
Similar threads
- Question
- Question
- Locked
- Question