Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

The effects of Lithium on hardened concrete

Status
Not open for further replies.

mikeh

Structural
Joined
Feb 29, 2000
Messages
13
Location
CA
What are the possible worst case effects of a lithium salt solution being spilled on a strucutral concrete floor slab.<br>Assuming that the spilled had been cleaned up within 30 days? Assuming that no clean-up had occurred?
 
Assuming you are talking about Lithium Nitrate, there should be no detrimental effect on the concrete.&nbsp;&nbsp;Lithium Nitrate can be used as an admixture in concrete to reduce the potential for alkali-silica reactivity (ASR).&nbsp;&nbsp;Carbonates of lithium can be deleterious to concrete.
 
I am actually refferring to lithium bromide used in heating and cooling units. Would lithium bromide initiate corrosion in the reinforcement and/or encourage corrosion to such a degree that the spill alone could be blamed for spalling of the concrete due to corrosion of the reinforcement?
 
The lithium bromide used in absorption chillers is corrosive to steel.&nbsp;&nbsp;It usually has an inhibitor such as lithium nitrate or lithium chromate mixed with it to control corrosion, but in general, the lithium bromide could be expected to enhance the corrosion of rebar in concrete in a manner similar to chlorides.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top