Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Detailing of concrete structures.

Status
Not open for further replies.

Sangeen

Structural
Feb 18, 2024
1
I designed my building with ETABS and i got the values of reinforcement in column and beam and now i want to do detailing so according which section of ACI 318-14 should i do detailing. I need a systematic and detailed answer plz. I am a new user.
 
Replies continue below

Recommended for you

I think you would be assisted greatly with these two things:

1. ACI Detailing Manual
2. A good mentor - experienced engineer who can walk you through things.



 
Before you start anything, you should know the code requirements!
 
JAE and rapt are correct. You haven't designed anything, you have used a computer to analyze a building structure and spit out some results. Now comes the design.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor