Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Termoplastic material for drain, temperature of the water 95¦C continu

Status
Not open for further replies.
becerra

becerra

Mechanical
Joined
Jan 8, 2000
Messages
4
Location
IN
I want to know about some termoplastic piping for drainage. Temperature of the liquid for drain 95°C continuous.<br>
email:<A HREF="mailto:ctm@glide.net.in">ctm@glide.net.in</A>
 
Status
Not open for further replies.

Similar threads

S Jana
  • Question Question
Water contamination in oil of screw compressor for LPG BOG system.
Replies
2
Views
5K
LittleInch
LittleInch
REDA RAHIL
  • Locked
  • Question Question
insulation for the bottom head of the vessels
Replies
1
Views
2K
JStephen
JStephen
S
  • Question Question
Optistrcut to Nastran material conversion
Replies
1
Views
346
SWComposites
SWComposites
D
I need a Class 1 division 1 approved cable gland for both USA and Canada. And at the end of the cable there is a Molex connector.
Replies
0
Views
1K
denuwan
D
elinah34
  • Locked
  • Question Question
Design for manufacturing - Laser Cutting or Water Jet Cutting technologies
Replies
18
Views
9K
elinah34
elinah34

Part and Inventory Search

Sponsor

Back
Top