Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Template use in Lotus Suspension Analysis

Status
Not open for further replies.

t0nin0

Automotive
Joined
May 19, 2009
Messages
1
Location
FR
Hello,

Firstly,you'll fastly see that my english should be improved...

And before to submit my question I would like to congratulate the members of Eng-Tips forums because this site is very rich in information... I regret there is no same kind of technologic site in french !

I'm a french, member of a race association : The Clementeam-Racing, and I'm currently working on my "end of study" subject to validate a degree in engineering. I would like to do the analysis of our race car chassis which is a Dallara Nissan T02 (World Series) used in the Boss-GP championship with the software Lotus suspension analysis. I would like beginning to save the initial hard points of the front and rear axles as a new templates but I don't understand the difference between an <install> user file, a local user file and a custom template...

I hope to meet somebody using this software here.

Regards

t0nin0



t0nin0 - Engineering Leader
Automotive Front-axle parts development
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top