Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Technical Bid Evaluation for Plate Bending Machine

Status
Not open for further replies.
cardiff10

cardiff10

Mechanical
Joined
Mar 26, 2010
Messages
8
Location
SD
Dear All,

I need to create a form of TBE for plate bending/rolling machine for rolling of steel plate for pressure vessel fabrication. Can anybody supply a standard form for this evaluation?

Best Regards
Cardiff10
 
Status
Not open for further replies.

Similar threads

LS_SMS
  • Question Question
Membrane plus Bending At Component Level
Replies
3
Views
592
LS_SMS
LS_SMS
J
  • Locked
  • Question Question
Supplier for SA612 plate material for PQR
Replies
1
Views
989
fleischfresser
fleischfresser
yurachv
  • Question Question
Plate marking as per SA-480
Replies
11
Views
12K
yurachv
yurachv
Ratheesh_n
  • Question Question
stress reliving on 3mm 625 plate butt weld during PQR qualification for utilising in cladded vessel
Replies
2
Views
11K
Ratheesh_n
Ratheesh_n
mariolucas75
  • Locked
  • Question Question
Evaluation of internal corrosion pitting
Replies
1
Views
478
pvros
pvros

Part and Inventory Search

Sponsor

Back
Top