Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

System Identification Code ADS-B

Status
Not open for further replies.

PeteTheat

Aerospace
Apr 20, 2007
1
Hey,

I've got a question about the ADS-B messages, especially the point on the system identification code (Data Item I021/010 "Data Source Identification" (EUROCONTROL STANDARD DOCUMENT FOR SURVEILLANCE DATA EXCHANGE, Part 12 : Category 021, ADS-B Messages)
What data is included besides flight no?

Cheers, Pete
 
Replies continue below

Recommended for you

Pete,

Appendix A of Minimum Operational Performance Specification RTCA DO-260A describes it all.

It starts with list:

Airborne Position, Surface Position, Status, Identification, Airborne Velocity, Event-Driven Information, Data Link Capability, Common usage Capability, Mode S Capability, Aircraft Identification, Emergency/Priority Status, Target State and Status Information, Reserved, Operational Status

The list is followed by the 400 pages that describe each one in detail.

I looked it up out of curiosity.

If you really need to use the information, you'll probably want to purchase both volumes from RTCA.

Just Google to find them.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor