Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
swaging of nozzle cutout
- Thread starter lp2124
- Start date
Yes, but there is no specific percent, it depends on the hole size and material thickness.
Usually the thickness doesn't reduce below the nozzle attachment (stub ends or whatever), and they have a note that the thickness of the swage shall be increased to meet the mating connection, or at least the ones I've worked on do.
Usually the thickness doesn't reduce below the nozzle attachment (stub ends or whatever), and they have a note that the thickness of the swage shall be increased to meet the mating connection, or at least the ones I've worked on do.
- Status
Similar threads
- Question