Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SW2004 Drawing problem

Status
Not open for further replies.

Rocko

Industrial
Joined
Jan 4, 2003
Messages
219
Location
US
Every time in sw2004 i go and change the scale under edit sheet my title blocks with our company name will go back to the general out of the box title block, what is strange our company name ect.. is gone. Is this a bug, because i did not have this problem in SW2003.
 
When you are in the sheet properties dialog, make sure that you are not changing the sheet format.

This is assuming that when you are changing scale you don't mean you are changing sheet size B to C etc. You are actually changing from 1:5 to 1:10.

This scale change should have no effect on the sheet format.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top