Supress Parent w/out deleting feature

[FTMOTO]

I want to suppress an .IGES frame from Pro/MECHANICA,

but the features are dependent on the IGES. I do not want the IGES frame in my part file. Any suggestions?



Thanks,



Troy

 

[xcad]

Hello



If you have the Advanced Assembly Extension (AAX) of proe you can use the Data Sharing option.

Feature > Create > Data Sharing > select the surfaces you wanna copy from the iges model and before you end thje procedure turn them independed.

Now you have a native proe file with imported surfaces, use them to create solids (use quilt).

It is not the best way but it works well for simple parts



xcad

 

[kvision]

Ditto.

You can also use simp reps to remove the iges from the model then create a shrinkwrap part and make it solid.

Create an empty asm. Add whatever it is you want to make a model for.

Add an empty part.

use modify>mod part and pick the empty part.

User feat>create>data sharing>shrinkwrap.



Make sure you have created a simp rep and substituted the simp rep of the model without the iges frame.