Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Substructure finite element analysis codes

Status
Not open for further replies.

feamarc

Mechanical
Aug 6, 2004
3
I want to develop a simple finite element analysis codes using the substructure method.

Could any one give me some links or references, especially if some simple source codes will be grealy appreciated.

thanks,
 
Replies continue below

Recommended for you

thanks, feajob.

Do you know by any chance where i can find some demon source codes for substructure analysis

thanks
 
No, I am not sure about the source codes. Based on the theory, I think that the substructure analysis is nothing else than manipulating the local-global stiffness matrixes. For sure, having the source code can save your time. Look at the educational open source FEA codes. Because, I don’t think any commercial FE code give you this source.


Good luck,
AAY
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor