joan271273
Electrical
Can someone give me some parameters to evealuate the design of the roadways within a substation. I know of course that my largest load is the power transformer. How can I calculate my widths , radius,etc.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Substation Design Question
- Thread starter joan271273
- Start date
- Status
jbartos
Electrical
- Jan 15, 2000
- 6,440
Suggestions:
1. Post this topic in the Civil Engineers' Forum Area
2. Visit the nearest switchyard with approximately the same size transformers and other equipment, e.g. a nuclear power plant switchyard, and just measure those dimensions.
Then, compare results from Civil Engineers to the constructed roadways' dimensions.
1. Post this topic in the Civil Engineers' Forum Area
2. Visit the nearest switchyard with approximately the same size transformers and other equipment, e.g. a nuclear power plant switchyard, and just measure those dimensions.
Then, compare results from Civil Engineers to the constructed roadways' dimensions.
- Status
Similar threads
- Question
- Question
- Question