Subsea Plem

[JIMBOC]

Can somebody advise me what the usual pIping specification is for the piping and valves within the limits of a subsea PLEM .I am used to using 31.3 but would like to know if there are alternatives used by others

Cheers

 

[LittleInch]

Any of the pipeline codes you're using will cover PLEMs as well.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[SJones]

Another alternative is to mix and match standards to achieve design/cost optimisation objectives. Naturally, that approach isn't generally applied for an 'off the shelf' strategy.

Steve Jones
Corrosion Management Consultant

http://www.linkedin.com/pub/8/83b/b04

All answers are personal opinions only and are in no way connected with any employer.

 

[DekDee]

The last Sub-Sea project I was involved with:
Manifolds - ASME B31.3
PLETs - ASME B31.8 / DNV-OS-F101
Hope that helps,
Cheers,
Shane