Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
stud welding manufacture process
- Thread starter SAEEDGH
- Start date
You'll probably find more info in ISO 14555, however it's not clear to me what exactly you need.
Also, are you sure that the picture and what you describe, are the same? Doesn't look like it.
This is what carbon steel studs in small diameters usually look like:
and the larger studs indeed have a similar tip, but they are different in appearance:
Also, are you sure that the picture and what you describe, are the same? Doesn't look like it.
This is what carbon steel studs in small diameters usually look like:
and the larger studs indeed have a similar tip, but they are different in appearance:
- Thread starter
- #3
mfgenggear
Aerospace
A good starting point is the manufacturer of the machine. Contact them for the settings. And procedure. Then AWS
Similar threads
- Question
- Locked
- Question