Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Structural Clip with PV Elite

Status
Not open for further replies.
acaughey

acaughey

Mechanical
Joined
Sep 25, 2008
Messages
4
Location
US
I am designing a pressure vessel where my customer wants (2) lugs/ clips welded to the vessel to support piping. Is anyone aware of a way to input this into PV Elite?
 
Sort by date Sort by votes
Hi Acaughey,

In PV Elite, force and moments option is available.you have to apply the pipe & clips loads on the vessel at particular node (support point). we have to taken the pipe & clips loads & moments from pipe stress analysis report.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
PV Elite tubesheet direction
Replies
1
Views
6K
Si-bo
Si-bo
MizanAMC
  • Question Question
Designing Blind Flange in PV Elite 26
Replies
13
Views
8K
LittleInch
LittleInch
FPPE
  • Locked
  • Question Question
ASME Fixed Tubesheet Design Conditions in PV Elite
Replies
6
Views
4K
FPPE
FPPE
FPPE
  • Locked
  • Question Question
PV Elite Report - Tubes of the bundle
Replies
5
Views
4K
CuMo
CuMo
M L Kuselan
  • Locked
  • Question Question
PV Elite design Hub Type Self Reinforced Nozzle (SRN) with LIP
Replies
2
Views
2K
M L Kuselan
M L Kuselan

Part and Inventory Search

Sponsor

Back
Top