Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
stress values of 316 Ti for minus 175¦C EJMA
- Thread starter foxhill
- Start date
The Type 316 Ti is similar to Type 316, so in using ASME B31.3, the allowable stress value is 16.7 Ksi from 100 deg F down to -425 deg F.
For the Modulus of Elasticity, I used ASME B&PV Code, Section II, Part D, Table TM-1. For the austenitic stainless steel group, the Modulus at -325 deg F is 30.3 and at -200 deg F is 29.7. You can interpolate the specific value for your service temperature.
For the Modulus of Elasticity, I used ASME B&PV Code, Section II, Part D, Table TM-1. For the austenitic stainless steel group, the Modulus at -325 deg F is 30.3 and at -200 deg F is 29.7. You can interpolate the specific value for your service temperature.
- Status
Similar threads
- Locked
- Question
- Locked
- Solved