Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Strength properties of various glass types?

Status
Not open for further replies.
packman9

packman9

Mechanical
Joined
Jun 2, 2001
Messages
1
Location
US
Is there a test method that defines the strength properties of various glass types? I am using glass as a wall in a vacuum chamber about 6" x 10". I also need a calculation for determining its wall thickness.
 
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Muza33
  • Locked
  • Question Question
heating rate applicable for normalisation of Dish end for pressure vessel
Replies
0
Views
738
Muza33
Muza33
Muhammad Ijaz
  • Locked
  • Question Question
Hydrostatic test of tubes
Replies
1
Views
837
EdStainless
EdStainless
ValvEng05
  • Locked
  • Question Question
Allowable stress value of A453 660 D Studs
Replies
0
Views
851
ValvEng05
ValvEng05
EngineerRed
  • Locked
  • Question Question
A582 - S41600 Cond T / Mechanical Properties
Replies
1
Views
252
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top