Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

stop osnap from snapping to a hatch 1

Status
Not open for further replies.

paulvrug

Mechanical
Joined
Apr 1, 2003
Messages
7
Location
NL
When I want to draw a line or something and osnap is turned
on it also snaps to lines that are in a hatch.
(endpoint, midpoint, intersection)

Can anyone tell me how i can stop autocad from snapping to hatch lines in a way that it stil snaps to lines, circles etc.?(I mean not by turning osnap off)

Thanks,
Paul.
 
Not sure but put the hatching on a different layer and turn it off will work. I am sure someone will give you a real fix.
 
Paul

Overriding running object snap modes can be turned off by right click the OSNAP button at the bottom of the screen. This will bring up Drafting Setting dialog box and you can remove the active checks as needed to disable running object snaps. You can also pick to disable all running modes or pick the select all to activate all object snaps. Hope this helps - John
 
2005 has the option to turn off snapping to hatch objects. It's in options...user preferences.. I think
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top