Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steelpile in Concrete

Status
Not open for further replies.
L

Lau_Haulokke

Geotechnical
Joined
Mar 4, 2025
Messages
1
I have a steel pile cast into a cylindrical foundation. It is an IPE140. The diameter of the foundation is "d". The embedment depth is D. I have determined the moment and shear forces (M and V) at the center of the embedment. How can I determine if the pile is being pushed out of the side of the concrete? Which formula should I use?
 
Status
Not open for further replies.

Similar threads

Bor_An_Struc
  • Question Question
Post Installed Anchors to a Sandwich Precast PANEL ( 3 inch concrete concrete)
Replies
6
Views
2K
Bor_An_Struc
Bor_An_Struc
hemiv
  • Question Question
Sawcut control joints in formed concrete?
Replies
7
Views
1K
jhnblgr
jhnblgr
fp23
  • Locked
  • Question Question
Air Content in residential concrete
Replies
18
Views
6K
XR250
XR250
SteelPE
  • Question Question
Low Concrete Testing
Replies
16
Views
10K
dik
dik
YuleMsee
  • Question Question
Void Column In Reinforced Concrete column At Beam Junction
Replies
3
Views
8K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top