Feb 16, 2006 #1 static12 Structural Feb 6, 2006 12 Any good references to estimate steel fabrication labor costs (for example cutting, coping, and welding beam W12x14 to another beam W12x14)? Thanks.
Any good references to estimate steel fabrication labor costs (for example cutting, coping, and welding beam W12x14 to another beam W12x14)? Thanks.
Feb 17, 2006 #2 bridgebuster Active member Jun 27, 1999 3,969 It's tough to say, you don't provide much information as to what you want. Here in New York City, structural steel for bridges - material, fabrication, delivery, & erection - runs about $2~$2.50 per pound. If you're just looking to cut, cope, and weld two beams, it's about two hours work; just apply a labor rate. Upvote 0 Downvote
It's tough to say, you don't provide much information as to what you want. Here in New York City, structural steel for bridges - material, fabrication, delivery, & erection - runs about $2~$2.50 per pound. If you're just looking to cut, cope, and weld two beams, it's about two hours work; just apply a labor rate.
Feb 17, 2006 #3 DVSVojvoda Structural Dec 13, 2005 5 I was a SE and then became a GM of a steel Fabricating Company. I don't know what you are going to use the info for, but you need to possibly contact a fabricator in your area. There are many different factors that effect the price of steel. Upvote 0 Downvote
I was a SE and then became a GM of a steel Fabricating Company. I don't know what you are going to use the info for, but you need to possibly contact a fabricator in your area. There are many different factors that effect the price of steel.
