Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steam Piping Crossing Building Seismic Joints 1

Status
Not open for further replies.

sigma1525

Structural
Joined
Dec 21, 2010
Messages
18
Location
US
Not sure if this is the right forum but I will try.

We have a steam pipe crossing a seismic expansion joint between two building with differential building movements but the Mechanical EOR doens not want to provide flexibility into his/her system and obviously, the owner takes their advise and does not want to provide anything extra.

Based on our analysis the piping is not flexible enough but the EOR refuses to accept our recommendation.

Any recommendations will be appreciated
 
Insist on the owner. If he is not wanting to coply with mandatory regulations, order the change if with the authority, or if not, place in writing and with receipt your objection. If appropriate you could leave the job on that written cause. Make the objection in writing to anyone in the duty and obligation to keep the works by the rules. If the work reaches the end without correction, make unavoidable issue that the thing be corrected or the building not be fit for purpose in the meantime.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top