Static Mixer Sizing and Design

[tad123]

Gents,
Would like to thanks in advance for any advise/input/ideas. I want to blending 6000 Bbl/D of condensate (C1-C5) to 300,000 Bbl/d of heavy oil (SG = 0.8)at 1.5 barg and 46 C. At these conditions the condensate flowing into the Static Mixer has two phase with about 20% vapor by volume. In an ideal mixing (simulation result) we came up with all liquid phase product. Question is "Do we have or can we design a Static Mixer that meet the requirement above?" - I want my product in liquid phase only.
Regards,
TAD123

 

[tr6]

Try the Chemineer website for static mixers by Kenics.

 

[scorcher]

TAD123,
Ive found Sulzer chemtech to be v helpful in the past. Their Sulzer mizer seems to be a by-work for static mizers in ant searches I've done.
I know this is a bit of a cheat, btu let the experts do their stuff.
Scorcher

http://www.sulzerchemtech.com

 

[scorcher]

TAD123,
Ive found Sulzer chemtech to be v helpful in the past. Their Sulzer mizer seems to be a by-work for static mizers in ant searches I've done.
I know this is a bit of a cheat, but let the experts do their stuff.
Scorcher

http://www.sulzerchemtech.com