Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Start Directory setting

Status
Not open for further replies.

amitkulk

Automotive
Joined
Jun 30, 2002
Messages
52
Location
US
Dear Catia V5 users,

Just a helpful tip for you.

If any user wants to start the catia v5 session in a perticular directory (Normally project directory) then you have to change a setting so that you will start the catia session in same directory.

Go to tools >> options >> general >> documents >> DLname

click on Dlname >> configure >> add

then a path will be added just click on the path and say browse and then set which ever path you like

and then close the session and restart catia

regards

Amit Kulkarni


 
hello,

You can also configure tools >> options >> general >> documents : Other folder option ( use browse to select the one you want)

The best is still to configure an Environment with all those nice settings as an admin...

And put the UserSettings into different location for each environment... Like this you can really have different CATIA environment... You can even add Standards for Drafting, for 3D ( having solide in another color that the default one, surfaces and point using standard of your own)

If anyone is working on that and is using the CATStdLayersAndFilters.xml file, I need some feedback plz. Have fun,

Eric

catiav5@softhome.net
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top