Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stainless Hardware
- Thread starter pperlich
- Start date
- Thread starter
- #3
ASTM F593
I would say they are not permitted in a Div. 1 PV. Is that correct?
I would say they are not permitted in a Div. 1 PV. Is that correct?
Masters2788
Mechanical
I use the following stainless hardware when designing in accordance with ASME Section VIII, Div.1:
304 SS bolting = SA-193-B8
316 SS bolting = SA-193-B8M
I have never used any of the designations you have listed for pressure vessel design.
304 SS bolting = SA-193-B8
316 SS bolting = SA-193-B8M
I have never used any of the designations you have listed for pressure vessel design.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question