Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ST2 the verdict - So far 1
- Thread starter karmoh
- Start date
PatCouture
Mechanical
I tried inserting letters in the balloon without success so I don't think it's possible.
Patrick
Patrick
beachcomber
Mechanical
Thanks Pat,
If we can get our partner to go to ST2 at least we have a 'user defined' column that we could use for item ref.
Not ideal.
The problem arises because our cient is using a system from 30 years ago and manual drawing when you detailed some parts on the assembly. A part detailed on the sheet has a number for the ref, but a part called up from another drawing has a letter ref.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
If we can get our partner to go to ST2 at least we have a 'user defined' column that we could use for item ref.
Not ideal.
The problem arises because our cient is using a system from 30 years ago and manual drawing when you detailed some parts on the assembly. A part detailed on the sheet has a number for the ref, but a part called up from another drawing has a letter ref.
bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.
Where would we be without sat-nav?
- Status
Similar threads
- Locked
- Question
- Locked
- Question