O
Old Clicker
Guest
Can anyone tell me where to get a tutorial to make a square to round transition.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
- Thread starter
- #2
- Thread starter
- #3
O
Old Clicker
Guest
Thanks
I should have said it is a sheet metal part and I need to be able to unfold it.
I should have said it is a sheet metal part and I need to be able to unfold it.
- Thread starter
- #4
M
MadHatter
Guest
Now that´s something completely different
Sorry, can´t help you with sheet metals, never did that...
- Thread starter
- #5
D
Dee Jayen
Guest
In SW 2010 there is a Lofted Bend feature in the Sheet Metal tools. You do the same thing as above, two sketches on different planes. The only thing you need to do is break the circle and square so that they are not closed loops. I had to play around a bit, changing the order the sketches were selected to get it to work.
Attachments
- Thread starter
- #6
K
Kevin De Smet
Guest
Actually, on the sheet metal tab in the ribbon there is a lofted bend command that should be right up your alley. Haven't used it personally though.
