Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spot weld with specified diameter

Status
Not open for further replies.
prakhar5aug

prakhar5aug

Automotive
Joined
Jul 19, 2014
Messages
28
Location
FR
I have been trying to spot weld 2 sheets - with weld point in modelling and weld mesh in fem it works fine but i want to give the weld diameter so i have used CWELD connections it works fine with 1 mm diameter but above that it gives this error

*** USER FATAL MESSAGE 7200 (MDG2PAT)
GHA/GHB POINTS LAY OUTSIDE OF PATCH FOR CWELD/CFAST ELEMENT 2400

 
Status
Not open for further replies.

Similar threads

Carbonated
  • Question Question
Distance constraint incompatible with cylindrical
Replies
2
Views
5K
Carbonated
Carbonated
MANox
  • Locked
  • Question Question
Hole with fit
Replies
0
Views
2K
MANox
MANox
yy912
  • Locked
  • Question Question
How to move a specified part only and add constraint at the same time?
Replies
5
Views
759
ewh
ewh
P
  • Question Question
any company/individual with a NX licese for sale?
Replies
2
Views
2K
peritoind
P
A
  • Locked
  • Question Question
NX10/TC11. Problem with background saving CGM
Replies
2
Views
1K
Argmnt
A

Part and Inventory Search

Sponsor

Back
Top