Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Specifying class for Method A

Status
Not open for further replies.
kevlar49

kevlar49

Materials
Joined
Jun 1, 2006
Messages
287
Location
US
Hi,

I have a drawing that calls out ASTM E1417 Type I method A, form d, class 2. Is solvent remover class only specified on ASTM E1417 Type I, Method C or could it be specified if "form d" (nonaqueous) developer is used?
 
Sort by date Sort by votes
kevlar49,

Solvent removable is Method C. (You are only going to do solvent removable with Type II inspections (visible)). Method A is water washable. There is no solvent remover used with water washable penetrants.

Jr97
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

J
  • Question Question
Charpy Testing for Eyebolts
Replies
2
Views
4K
jamspill
J
V
  • Question Question
Bolts and Nuts for High-Temperature Applications – Ambiguities in European Standards
Replies
13
Views
7K
WKTaylor
WKTaylor
MicroEng
  • Locked
  • Question Question
ASTM A 350 manufacturing
Replies
5
Views
4K
mfgenggear
mfgenggear
SK METT
  • Locked
  • Question Question
Weldability testing for Ni-Al-Br(C95800)
Replies
0
Views
788
SK METT
SK METT
G
  • Locked
  • Question Question
Stainless Steel for ASME BPVC VIII
Replies
3
Views
4K
Andy Mayfield
A

Part and Inventory Search

Sponsor

Back
Top