Specifying class for Method A

[kevlar49]

Hi,

I have a drawing that calls out ASTM E1417 Type I method A, form d, class 2. Is solvent remover class only specified on ASTM E1417 Type I, Method C or could it be specified if "form d" (nonaqueous) developer is used?

 

[JR97]

kevlar49,

Solvent removable is Method C. (You are only going to do solvent removable with Type II inspections (visible)). Method A is water washable. There is no solvent remover used with water washable penetrants.

Jr97