Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spec and Filter Drawings

Status
Not open for further replies.
timey

timey

Aerospace
Jun 2, 2012
17
Any Experts on using Spec and Filter Drawings? I know how to work with these, but need advice on how to speed up the time it takes to update views after replacing components in the assembly. I'm working with very large assemblies.
 
Status
Not open for further replies.

Similar threads

SDETERS
  • Locked
  • Question
3D PMI and MBD vs 2D Drawings
Replies
0
Views
540
SDETERS
SDETERS
Nandy123
  • Question
Macro for 2-D drawings
Replies
0
Views
3K
Nandy123
Nandy123
CAD2015
  • Locked
  • Question
Format Painter in NX drawings................... 1
Replies
2
Views
588
CAD2015
CAD2015
hmichel
  • Question
NX2312 Sketcher and Drafting - Approximate Dimension Symbol
Replies
3
Views
4K
SDETERS
SDETERS
SBlackBeard
  • Question
NX Journal for PMI and Location
Replies
2
Views
2K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top Bottom