Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Spacing Requirements 2

Status
Not open for further replies.

99491

Mechanical
Joined
Apr 3, 2008
Messages
34
Location
KE
Can someone please tell me the spacing requirements in a depot between 2 storage tanks and also between a storage tank and bund wall.
 
You should see NFPA 30-2008, Section 22.4.
 
Thanks. However I do not have NFPA 30 and need the information asap. Is there any chance you could please advise on my 2 requirements. Would be much appreciated.
 
The rules in NFPA 30 are complex and it is not possible to provide an answer without further details pertaining to the installation including:

- Type of tank (floating roof, fixed roof, horizontal, etc)
- Contents (Class 1, Class 2, Class 3a, etc.)
- Tank size (diameter and volume)
- Tank operating pressure

I recommend you go to a site like Techstreet.com where you can purchase NFPA 30 for immediate download and then you'd be able to review the requirments and make an appropriate selection

Regards,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top