Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SolidWorks menu customization 1
- Thread starter dogarila
- Start date
SBaugh is correct.
Once compiled, you will have to run the Add-In Manager
to register it with Solidworks, additionally the .dll will have to be registered with your system.
Otherwise, VB may be the way to go instead of having a menu item directly in SW.
Once compiled, you will have to run the Add-In Manager
to register it with Solidworks, additionally the .dll will have to be registered with your system.
Otherwise, VB may be the way to go instead of having a menu item directly in SW.
-
1
- #4
If you want to use VB, you will have to cheat. You can assign a macro button to a program that will present your menu, in this case a form that has your items on it. Like SBaugh and jmagee indicated, you will need C++ to add menu items. DimensionalSolutions@Core.com
While I welcome e-mail messages, please post all thread activity in these forums for the benefit of all members.
While I welcome e-mail messages, please post all thread activity in these forums for the benefit of all members.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
