SolidWorks Certification Test Deadline

[CADGemini]

Hello All,

Just wanted to remind each of you today is the last day you can get the free exams and your certification as either a CSWA or CSWP. It is free for each subscription and you will have until the end of July to take the test. Even if you are not ready it is worth trying to see where you should improve.

I just got mine today so pass this on to others who might be interested.

Go Here for the info:

https://www.solidworks.com/pages/services/subscription/Certification.html

Best Regards,
Jon Knabenschuh

Gemini CAD Solutions

http://www.geminicadworks.com

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2007

 

[fcsuper]

Just a reminder, the dealine to "buy" the test is July. You can take it one time anytime there after (months later, if you like).

Matt Lorono
CAD Engineer/ECN Analyst
Silicon Valley, CA
Lorono's SolidWorks Resources
Co-moderator of Solidworks Yahoo! Group
and Mechnical.Engineering Yahoo! Group

 

[ShaggyPE]

June 30 is the last day to "buy" the exam for free using the voucher. According to SolidWorks:

Redeemed coupons tests must be completed no later than July 31st, 2008.

-Dustin
Professional Engineer
Certified SolidWorks Professional

 

[grunt58]

I have redemed my free voucher when do I have to use the voucher by? end of July?

or according to fcsuer I have sometime to use the "free" purchased voucher.

Thanks

Grant
Applications Engineer
SW2008 X64 SP 3.1
Dell Precision T5400
Nvidia Quadro FX 5600
Xeon 2.5GHz Quad Core, 4GB RAM
XP Pro X64 SP2.0

 

[CorBlimeyLimey]

For the free promotional test;

*3) Promotion has been extended through June 30, 2008.

*4) Redeemed coupons tests must be completed no later than July 31st, 2008.

For the regular purchased test, I believe there is no deadline, but cannot find verification of that.

 

[Shawlin]

I have passed CSWA, it's time for CSWP. are there any resource to prepare such test, such as practice or workbook?

 

[ShaggyPE]

There is a practice exam on the SolidWorks website and I recommend that you read through this thread:
thread559-199455

-Dustin
Professional Engineer
Certified SolidWorks Professional

 

[CADGemini]

Shawlin,

Congratulations on passing the CSWA exam. Good Luck on the CSWP but from what I heard on here it is not as difficult as previous CSWP tests.

Best Regards,
Jon Knabenschuh

Gemini CAD Solutions

http://www.geminicadworks.com

Challenges are what makes life interesting; overcoming them is what makes life meaningful.

Solidworks 2007