Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Solid Edge Simulation
- Thread starter Jc1981
- Start date
- Thread starter
- #3
- Thread starter
- #5
you can import the actual NX file?
will it FEA and CFD?
Will I need both of these?
Are does Premium take care of all of it
will it FEA and CFD?
Will I need both of these?
Are does Premium take care of all of it
BlasMolero
Mechanical
Dear JC1981,
SOLID EDGE SIMULATION do not import any FEA or CFD data from NX, you can import only geometry, say native *.prt, or Parasolid *.X_T, step, etc..
You need to define the full FEA model in SOLID EDGE SIMULATION: preparae geometry, mesh, apply loads & boundary conditions and solve, and finally postprocess results.
For CFD you have FloEFD for SOLID EDGE: exactly the same procedure.
Best regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
SOLID EDGE SIMULATION do not import any FEA or CFD data from NX, you can import only geometry, say native *.prt, or Parasolid *.X_T, step, etc..
You need to define the full FEA model in SOLID EDGE SIMULATION: preparae geometry, mesh, apply loads & boundary conditions and solve, and finally postprocess results.
For CFD you have FloEFD for SOLID EDGE: exactly the same procedure.
Best regards,
Blas.
~~~~~~~~~~~~~~~~~~~~~~
Blas Molero Hidalgo
Ingeniero Industrial
Director
IBERISA
48004 BILBAO (SPAIN)
WEB: Blog de FEMAP & NX Nastran:
- Thread starter
- #7
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
