Dec 7, 2004 #1 rmetzger Mechanical Dec 2, 2004 200 Does anyone know of a good site with equations / software to get an estimate on the force generated by a custom coil.
Does anyone know of a good site with equations / software to get an estimate on the force generated by a custom coil.
Dec 7, 2004 #2 btrueblood Mechanical May 26, 2004 10,020 No, and if you find one, let us know! Upvote 0 Downvote
Dec 8, 2004 #3 Lakey Electrical Jul 25, 2003 66 Hi, 1. This may help: Thread237-84957 2. Take a look at what Matlab has to offer. 3. See Electric Machinery - McGraw Hill Best regards, Upvote 0 Downvote
Hi, 1. This may help: Thread237-84957 2. Take a look at what Matlab has to offer. 3. See Electric Machinery - McGraw Hill Best regards,
Dec 8, 2004 Thread starter #4 rmetzger Mechanical Dec 2, 2004 200 I'm curious - did the equations given the the posted threat give a value similar to what you were getting experimentally? Upvote 0 Downvote
I'm curious - did the equations given the the posted threat give a value similar to what you were getting experimentally?
Dec 8, 2004 #5 Lakey Electrical Jul 25, 2003 66 rmetzger, No i did not. But when i get the time to pick this pet project up again and take it a step further. If you achieve any practical success please let me know.... Bear in mind that this subject is closely related to some EE course work, so I doubt there will be too much help. Regards, Upvote 0 Downvote
rmetzger, No i did not. But when i get the time to pick this pet project up again and take it a step further. If you achieve any practical success please let me know.... Bear in mind that this subject is closely related to some EE course work, so I doubt there will be too much help. Regards,
