Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Solenoid Valve Actuator DC Supply

Status
Not open for further replies.
kingbambina

kingbambina

Electrical
Joined
Mar 7, 2022
Messages
12
Location
SA
Hi,

We have an old actuator that is fed by 125 VDC. We received a new replacement for it but it is for 110VDC. Is it ok to use the same supply for the new one? I looked for the datasheet but it doesn't mention the voltage tolerance.

Thanks
 
Sort by date Sort by votes
Put a resister of suitable power capabilty in series with the 110 volt coil to drop the voltage to the 110 Volt coil.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

FrancoisY
  • Locked
  • Question Question
Understanding Actuator VA
Replies
4
Views
4K
LittleInch
LittleInch
TMcRally
  • Locked
  • Question Question
Back EMF on solenoid control
Replies
19
Views
6K
TMcRally
TMcRally
rabsantos0325
  • Locked
  • Question Question
ETAP 19 - INVERTER AC/DC MISMATCH ERROR
Replies
0
Views
595
rabsantos0325
rabsantos0325
PowerHydro
  • Locked
  • Question Question
How to properly measure solenoid coil current.
Replies
5
Views
721
IRstuff
IRstuff
DrDrreeeaaa
  • Locked
  • Question Question
Burst Firing for an AC Voltage Controller - What is the supply current rating?
Replies
8
Views
707
waross
waross

Part and Inventory Search

Sponsor

Back
Top