Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Soil Classification

Status
Not open for further replies.

ONENGINEER

Geotechnical
Joined
Oct 13, 2011
Messages
284
Location
CA
Can someone explain the difference between Modified Unified and Unified soil classification systems. What are the pros and cons of one against the other.

Why some used the A line on Casagrande Chart and others use A and U line with little differences near the PI less than 4?

My search did not yield convincing answers. Many thanks for clarifications on the above.
 
Last edited:
The Modified ones usually just add more things which may vary from firm to firm and place to place. There is no intermediate plasticity in the original USCS, and I don't think the original USCS had all the qualifiers that have later been added.

In truth, no one follows these systems in entirety. There are always local terms that creep in and aren't written down or tacit knowledge. I don't think 'Clay Till' is a term used in any official classification system but it is commonly used to describe soils in Alberta, many of which are technically on the coarse grained side of the 50/50 split in the USCS.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top