Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Software ETAP

Status
Not open for further replies.
A.BC

A.BC

Student
Jan 24, 2022
1

I want to connect a single phase inverter with photovoltaic panel to a three phase bus with software etap.

The connection can't be done with the phasor adapter. I am having this error:

Error 1653-01: [PA6] Failed in calculating phase adapter load. This phase adapter may be involved in a loop.

That is why, I hope to know if there is any solution to realize this connection.

Thanks.
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question
The Isc setting interface of the inverter in ETAP disappears
Replies
0
Views
2K
Sipeng
S
T
  • Locked
  • Question
enquiries on etabs software
Replies
2
Views
2K
CSIESPL INDIA
CSIESPL INDIA
J
  • Solved
Choosing the Right CAD Software for Mechatronics Projects
Replies
15
Views
5K
TMcRally
TMcRally
Rayzdayz
  • Locked
  • Question
Automotive repair software
Replies
2
Views
261
rb1957
rb1957
Daniel Calvetty
  • Locked
  • Question
Simulation Software
Replies
1
Views
205
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top Bottom