Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

The Isc setting interface of the inverter in ETAP disappears

Status
Not open for further replies.
S

Sipeng

Student
Joined
Dec 18, 2024
Messages
1
The ETAP user manual shows that there is a column called SC contribution to AC system in the inverter rating setting interface. However, I did not find this column when I opened the interface in the software.
The first figure is from ETAP user manual and the second figure is from the software.How can i find the column?
1734487189789.png1734487350446.png
 
Status
Not open for further replies.

Similar threads

M_U
  • Question Question
Use of eccentricities values to counter the torsion in ETABS.
Replies
2
Views
10K
human909
human909
S
  • Question Question
How to Align Columns with the Edge of the Slab Without Affecting the Facade Line?
Replies
3
Views
1K
ITsSB
ITsSB
O
  • Question Question
Thermodinamycs. Formula to calculate the efectiveness of a regenerator
Replies
2
Views
2K
ochodoce
O
A
  • Question Question
What should I do if I have never been exposed to calculating the situation of objects in liquids, but I want to know the state of objects in the water
Replies
2
Views
2K
Aaron Chen
A
A
  • Question Question
Looking for the name of a material
Replies
3
Views
3K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top