Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Slurry pump
- Thread starter ris2
- Start date
Hello,
It's impossible to answer this question without having the specifics of the slurry. But one quick way to find out is to determine what other companies having the same or similar slurries use. If others are using a specific type of pump successfully, then you will have your answer!
It's impossible to answer this question without having the specifics of the slurry. But one quick way to find out is to determine what other companies having the same or similar slurries use. If others are using a specific type of pump successfully, then you will have your answer!
patrickraj
Chemical
For ammoniumphosphate slurry we use Wilfly PuMps for about 30-years(80-87% solids),SG-1.5,Temp.125-130deg C
Since the variables are many and ris2 didn't submit any detail on what is the slurry composed of, the least I can do is suggest to read a Chem. Eng. article published April 25, 1977 titled Slurry pump selection and application by J. Ingemar Dalstad, of Morris Pumps, Inc (McGraw-Hill).
If you are looking for a pump that can help you work with slurries you should try discflo pumps. There is nothing more effective. Try
bulkhandling
Mechanical
If it's for mining slurry, contact Metso, GIW, Warman.
- Status
