Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch display in drawing view

Status
Not open for further replies.

Bhaveshn

Mechanical
Joined
May 23, 2007
Messages
72
Location
CA
How I can display a model sketch in its drawing view?
 
Assuming you are in draft. Right click on the view, select properties, select Display tab, select 3 button over on the top - Part list options, and select List sketches, you will see your sketchs in the parts list, select the sketch or sketches you want to view and check the "show" button, apply and update your view and you should see the sketch.

Best of luck,
Jamie
 
Thanks Jamie,
This works perfect.

I am trying to retrive sketch having image to represent it on drawing view. It shows only imager border when I follow your instr.

Bhavesh
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top