Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Situation of Inert gas (CO2) Line

Status
Not open for further replies.
jafary64

jafary64

Mechanical
Joined
Nov 12, 2009
Messages
31
Location
US
Hi
Where is the position of the main CO2 gas or inert gas header line in comparison of HVAC duct
above or below the HVAC duct in the Substation building?
Do you know standards or spec or reference in this field
thank you
 
Status
Not open for further replies.

Similar threads

M.Jamali
  • Locked
  • Question Question
CO2 Gas Suppression PID
Replies
1
Views
1K
LittleInch
LittleInch
M.Jamali
  • Question Question
NFPA 12- CO2 SUPPRESSION - DISCHARGE FLOW RATE
Replies
0
Views
301
M.Jamali
M.Jamali
C
  • Locked
  • Question Question
NFPA2001 GAS SUPPRESSION SYSTEM
Replies
7
Views
6K
DavidCR
DavidCR
P
  • Question Question
NFPA 20 - Check valve on fuel return line
Replies
1
Views
3K
LittleInch
LittleInch
SprinklerDesigner2
  • Question Question
Hydrant flow test with static and residual obtained DOWNSTREAM the flowing hydrant on a dead end line.
Replies
7
Views
12K
cdafd
cdafd

Part and Inventory Search

Sponsor

Back
Top