Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CO2 Gas Suppression PID
- Thread starter M.Jamali
- Start date
LittleInch
Petroleum
How about you start from a blank piece of paper and draw one and then ask it that looks good.
You'll never learn anything from just copying thing which then might be good, bad or not suitable for your particular system.
This is not a free engineering service, but a forum for discussing NFPA code issues.
If you can't do that then you really shouldn't be responsible for such a system IMHO.
You'll never learn anything from just copying thing which then might be good, bad or not suitable for your particular system.
This is not a free engineering service, but a forum for discussing NFPA code issues.
If you can't do that then you really shouldn't be responsible for such a system IMHO.
- Status
Similar threads
- Locked
- Question