Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulate shock in pipes,

Status
Not open for further replies.
admincae

admincae

Mechanical
Joined
Apr 10, 2010
Messages
20
Location
RO
Good morning,

Can somebody tell me if I want to simulate some shock in a pipes when some valves are close in a short time, what type of american standards I can apply?

Somebody can offers me some little support to resolve this problem?

To resolve this problem I will use ANSYS Classic 14.

Thanks in advance for support.

Best regards.

Mess with the best die like the rest...ANSYS is the best !!!
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
820
Rabea-19
R
pnomura
  • Locked
  • Question Question
Drop Test in Transient Structural
Replies
1
Views
1K
jamesdean2
jamesdean2

Part and Inventory Search

Sponsor

Back
Top