Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simulate anchors by finite elements

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
I have a reinforced concrete box which has 4 steel anchors in each corner. These anchors are used to elevate or to move the box. I would like to know how to do the finite element analysis in the joint created by the reinforced concrete and the steel anchor.
 
Status
Not open for further replies.

Similar threads

joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
796
joesm519
joesm519
vanji1
  • Locked
  • Question Question
If I want to construct myself a geometric stiffness matrix induced by a pre constraint with finite element modeling
Replies
0
Views
1K
vanji1
vanji1
A
  • Locked
  • Question Question
Help with Adaptive Quadrature in Finite Cell Method
Replies
3
Views
2K
rb1957
rb1957
BioMes
  • Locked
  • Question Question
Wedge elements
Replies
11
Views
1K
SWComposites
SWComposites
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
370
Kamyar_K
Kamyar_K

Part and Inventory Search

Sponsor

Back
Top