Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Simplified slip-bearing action by using stop ellement in Abaqus

Status
Not open for further replies.
Mona20016

Mona20016

Civil/Environmental
Joined
Apr 14, 2016
Messages
2
Location
IR
Hi
can anyone please advise me to define connector ellements with following details:
Using rigid plastic CARTESIAN element and a STOP element in parallel and The connector behaviour must be:
1- rigid up to the slip force limit Rn
2- slip at the bolts up to ±1 mm at constant force Rn
3- rigid bearing hardening
1234_qmh5bh.jpg

Thanks.
 
Status
Not open for further replies.

Similar threads

AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
3K
AhmedEltaweel
AhmedEltaweel
Kamyar_K
  • Locked
  • Question Question
Slip in the rigid railroad track - ABAQUS model
Replies
3
Views
877
Kamyar_K
Kamyar_K
Kamyar_K
  • Locked
  • Question Question
Changing the slip interface by loading rate
Replies
0
Views
369
Kamyar_K
Kamyar_K
swahlgren
  • Locked
  • Question Question
Abaqus 2025 installation files
Replies
2
Views
2K
FEA way
FEA way
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top