Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

simple contour plot question

Status
Not open for further replies.
curlyq

curlyq

Bioengineer
Joined
Jun 6, 2010
Messages
28
Location
US
I am having a brain fart this afternoon and can't remember how to turn off the mesh on my stress contour plot using CAE. Help?
 
Sort by date Sort by votes
Options-Common Basic Tab, Select Visible Edges to be something other than Exterior Edges or All Edges.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ShiningEngineer
  • Locked
  • Question Question
How to plot the chosen element values permanent for plot export
Replies
2
Views
3K
ShiningEngineer
ShiningEngineer
HITVIP
  • Locked
  • Question Question
Abaqus: Why Viewport Shows Extra Border After Matplotlib Plot
Replies
0
Views
2K
HITVIP
HITVIP
abc123ali
  • Locked
  • Question Question
Requirment of input data for FEM analysis in ABAQUS and high resolution contour plot
Replies
8
Views
401
Adil Memet
Adil Memet
ShiningEngineer
  • Locked
  • Question Question
Understanding of Material Calibration Question
Replies
4
Views
1K
ShiningEngineer
ShiningEngineer
liq001
  • Locked
  • Question Question
Question about passing information from VUSDFLD to VFric_COEF/Vfirc
Replies
1
Views
2K
liq001
liq001

Part and Inventory Search

Sponsor

Back
Top